Over time, knives would tend to get dull because it is being used all of the time and for many different purposes. It is for this purpose that knives have to be sharpened from time to time so that it will still be able to retain its sharpness. Now for those who do not know how to do this process, here are some knife sharpening cleveland ohio tips.
Now before one would even start with the process itself, he has to make sure that he would get himself a stone or rock that has a smooth surface. Now for those who do not know, the stone will be able to sharpen the blade if the blade is grazed against the rock. So before even starting, one has to put the stone in water to clean it a little bit.
Now the very first thing that one should know is that he will not be using the smooth side of this rock to sharpen the knife. He will be using the rough edge of the rock in order to make sure that the blade becomes sharp. Now in order to get the rough edge, he has to first break the stone into two.
In order to do this, one first has to get a nail from his toolbox and use a hammer to jam the nail into the middle. The objective here is to make sure that the tough exterior of the stone has been penetrated. So the very first thing to do here would be to hammer the nail all the way down into the rock.
Now once there is already a stone in the hole, one can now take the nail out and get his drill. Since one part of the exterior has already been broken down by the nail, one may now use the drill to further penetrate the hole and eventually drill it down. So use the drill to crack the entire stone from the middle.
Now if the rock still does not want to break, then one would have to take more drastic measures. Now to totally slice the stone into half, one may use a saw to do this. Now once there are two pieces, one just needs to get any of those two pieces and place it on a flat and strong surface.
After that, he may now get his knife and start stroking the knife on the rough edge of the stone. He should stroke the blade in very swift but soft movements so that the blade will get sharper. Of course he should also do this carefully because if he is not careful, he might actually hurt himself sharpening the blade.
Now one thing that he should remember is that he should never push the blade on to the stone too hard otherwise the blade might get damaged. Of course when this happens, the effectiveness of the blade will not be as good as before anymore. That is why one has to always make sure that he moves the knife softly.
Now before one would even start with the process itself, he has to make sure that he would get himself a stone or rock that has a smooth surface. Now for those who do not know, the stone will be able to sharpen the blade if the blade is grazed against the rock. So before even starting, one has to put the stone in water to clean it a little bit.
Now the very first thing that one should know is that he will not be using the smooth side of this rock to sharpen the knife. He will be using the rough edge of the rock in order to make sure that the blade becomes sharp. Now in order to get the rough edge, he has to first break the stone into two.
In order to do this, one first has to get a nail from his toolbox and use a hammer to jam the nail into the middle. The objective here is to make sure that the tough exterior of the stone has been penetrated. So the very first thing to do here would be to hammer the nail all the way down into the rock.
Now once there is already a stone in the hole, one can now take the nail out and get his drill. Since one part of the exterior has already been broken down by the nail, one may now use the drill to further penetrate the hole and eventually drill it down. So use the drill to crack the entire stone from the middle.
Now if the rock still does not want to break, then one would have to take more drastic measures. Now to totally slice the stone into half, one may use a saw to do this. Now once there are two pieces, one just needs to get any of those two pieces and place it on a flat and strong surface.
After that, he may now get his knife and start stroking the knife on the rough edge of the stone. He should stroke the blade in very swift but soft movements so that the blade will get sharper. Of course he should also do this carefully because if he is not careful, he might actually hurt himself sharpening the blade.
Now one thing that he should remember is that he should never push the blade on to the stone too hard otherwise the blade might get damaged. Of course when this happens, the effectiveness of the blade will not be as good as before anymore. That is why one has to always make sure that he moves the knife softly.
About the Author:
You can visit www.LLsharpening.com for more helpful information about Knife Sharpening Cleveland Ohio Tricks.
No comments:
Post a Comment